MOVABLE GLASS WALL SYSTEM

MOVABLE GLASS WALL SYSTEM
As a general rule no switches, alarms, thermostats, doorframes, etc. should be placed on the fixed walls or columns directly below the pocket. If it is absolutely necessary then that the movable glass wall system should be flush mounted and never located in the area on the fixed wall occupied by the wall in its closed or down position.
  • movable glass wall system

  • office glass partitions


  • glass partitions
    wall_soundproofing_systems
    wall_soundproofing_systems

    nms_glass_folding_partition
    acoustical_glass_wall

    www.skyfoldmirage.com
    Mirage_Folding_Walls
    • The moving glass wall system shall be opened and closed using a spring return, 3 position key switch. Turning the key from the “off” position shall cause the wall to move in the designated direction “up” or “down”. When hand pressure is removed, the movable glass wall system shall immediately stop. The movable glass wall system shall stop in a quick and positive fashion without coasting. As a normal part of the operation, it shall be possible to partially open (or close) the wall, stop it and then reverse the operation. There shall be 2 key switches per operable wall, on either side of the axis of the wall.
         		The load is static and requires less than a movable glass wall system because the load does not shift to one end of the building when stored and does not require pockets for storage in the wall.

    ca-healthcare.com / office glass partitions / MOVABLE GLASS WALL SYSTEM